Sculling Sleeves & Buttons
The easily distinguishable Croker pink was first introduced in 1992 when Kaye Croker decided she could make masculine rowers use pink. What started as a threat has become the hallmark of Croker genuineness and quality. Our Croker pink sleeves, teamed with our yellow buttons, make a Croker Oar impossible to miss!
Firmer lockup while maintaining smoothness of the Croker Sleeve.
​
No tools needed for adjustment!
​
Available for Arrow and Standard Shafts
​
Introducing the Sculling MK4 Quick Adjustment Button and the Sculling MK4 Sleeve
Sculling MK4 Sleeve and
Quick Adjustment Lever Button
The MK4 sleeve is specially designed for the new quick adjustment lever button, held together with plastic interlocking clips. It is more stable with a larger surface area making the square and feather position more positive.
​
NOTE: Sculling MK4 Buttons will only fit a MK4 Sleeve
Sculling MK4 ARROW Sleeve
Fits Shafts: S39, S40
AUD $22.00ea
Sculling MK4 STANDARD Sleeve
Fits Shafts: S2, S3, S4
AUD $22.00ea
Sculling MK4 Quick Adjustable Lever Button
​
Fits shaft:
Arrow S39, S40
S2, S3, S4
AUD $22.00
​
Sculling MK3 Asymmetric Sleeve and
Quick Adjustment Lever Button
A major upgrade to the MK1 symmetrical sleeve and is held together with plastic interlocking clips. This double ended sleeve performs better because it only has two flat surfaces.
The asymmetric design reduces the distance between the shaft and the swivel face. It is more stable square or feathered and positive in its movement, squaring and feathering. This asymmetric design is not recommended for use with the Magik or Martinoli swivels as these swivels produce excessive wear on the sleeves.
Fits: S2, S3, S4 and S39/S40 Arrow shafts
Sculling MK3 Sleeve (Pair)
Fits Shafts: Arrow S39, S40
S2, S3, S4
AUD $22.00 Pair
MK3 Button
Sculling MK3 Quick Adjustable Lever Button
​
Fits shaft:
Arrow S39, S40
S2, S3, S4
AUD $22.00 each
​
Sculling MK3 Button
(no Lever)
​
Fits shaft:
Arrow S39, S40
S2, S3, S4
AUD $6.60 each
​
MK1 Symmetrical Sleeve and Button
The MK1 sculling sleeve comes in two parts, the sleeve body and the clip (back). The inboard measurements are calibrated on the back of the clip.
The geometry of the sculling sleeve, if combined with rowlocks that have a 95 degree inside corner, provides excellent stability at the catch. The sculling clips can be replaced as required without removing the sleeve.
Available in two sizes:
Mark 1/S3: S3 shafts
Mark 1/S6: S5 and S6 shafts
Sculling MK1 Sleeve/S3
​
Fits shaft:
S3
AUD $44.00 Pair
​
Sculling MK1 Sleeve/S6
​
Fits shaft:
S5, S6
AUD $44.00 Pair
​
Sculling MK1 Button
​
Fits shaft:
S3, S5, S6
AUD $6.60 each
​